Skip to main content
SF6 gas handling tools

SF6 Calculator

Estimate SF6 recovery time, vacuum pump-down time, residual gas quantity, density, humidity conversion, leak rate and common gas handling units from one practical tool page.

Start calculatingDiscuss your SF6 project

Recovery time and residual gas guide values

Vacuum pump-down time estimation

SF6 density and mass estimation

Dew point, ppmv and ppmw conversion

Leak rate and mass flow estimation

SF6 engineering calculator

Use these guide calculations for SF6 recovery planning, vacuum pump-down, mass estimation, humidity conversion, leak testing, and common unit conversions.

Calculation results are for reference only. Please confirm with actual equipment parameters and site conditions.

Equipment flow presets

Estimated recovery time

14.6 min

Guide value based on an idealized flow model.

Recoverable SF6 mass

43.11 kg

Residual SF6 at final vacuum

35.95 g

Recovery ratio

99.92%

Formula used

Recovery time is estimated as t = (V / Q) x ln(P1 / P2), where volume and flow define the base exchange time and the pressure ratio defines how far the recovery process must go. SF6 mass is estimated from the ideal gas relation m = PVM / RT.

Send these values for equipment selection
Calculation results are for reference only. Real recovery and evacuation time depends on service cart capacity, pump condition, hose type and length, connector bore, gas temperature, filter condition, compartment geometry, moisture release, and site operating conditions. Please confirm final specifications before maintenance or quotation decisions.

Need equipment-specific values?

Send us your gas compartment volume, pressure, target vacuum, and operating conditions. We can help match the right SF6 recovery, filling, monitoring, or regeneration equipment.

Request support